SUNWELL 1350 is the Manlid Seal, Someone call it Tank Seal or EPDM PTFE Tank Gasket also.
Description
The Manlid Seal combines the resilience and compression set resistant of EPDM rubber with the outstanding chemical resistance of PTFE.
The seal's rectangular elastomeric core is enveloped on three sides by Top and Bottom sealing surfaces and Inside of gasket with 100% virgin PTFE.
Advantages
Excellent chemical resistance;
Withstands repeated opening / closing cycles without loss of sealing integrity.
Chemical Properties
The PTFE envelope makes the sealing faces and inside of gaskets chemically inert to media in the range PH: 0~14 including all bulk liquid cargoes in all IMO classes.
The virgin PTFE is non-absorbent, non-tainting, and hygienic for use with foodstuffs and edible oils.
Specification
Tank maximm pressure: 4bar
Maximum Temperature: +180 Deg C
Minimum Temperature: - 50 Deg C
Ordering and Coding details
| SUNWELL Code | Type | Size Details (Corss Section X x Y) |
| MS1350-D500-1 | DN500 | (14mm x 12mm) Section x 486mm Inner Dia. |
| MS1350-D500-2 | DN500 | (14mm x 14mm) Section x 486mm Inner Dia. |
| MS1350-D500-3 | DN500 | (14mm x 10mm) Section x 490mm Inner Dia. |
| MS1350-D300-1 | DN300 | (14mm x 12mm) Section x 294mm Inner Dia. |
| MS1350-D300-2 | DN300 | (14mm x 14mm) Section x 294mm Inner Dia. |
| MS1350-D300-3 | DN300 | (14mm x 10mm) Section x 294mm Inner Dia. |
SUNWELL accept the customerized services.
Kindly considering the mould charges when the diameter and sizes are not been mentioned on the list or contact with SUNWELL checking the molds inventories.